Our slat conveyors are built to order and come in a standard range of widths that correspond to the standard slat widths available. Widths range from 1 to 12 and single, multi lanes and twin or triple strands are also available.
Drives are via a motor gearbox located at the end of the conveyor. SEW Eurodrive motor gearboxes are fitted as standard but other manufacturers units can be fitted on request.
Construction can be of either mild or stainless steel and side frames are 2.5mm thick. Support stands are manufactured from box section and incorporate articulating adjustable feet for levelling.
Conveyors can be supplied with integrated bends which allow for smooth transportation during the change in direction. End transfer plates are also fitted where necessary with small diameter rollers to create a smooth transfer between conveyors.
Straight sections are fitted with adjustable side guide as using standard components and the size and spacing of the rails is engineered to suit each application. Bend section are usually supplied with fixed side guide to match the straight sections
Slat modules can be supplied using chain with a tab, bevel, base roller chain, knuckle chain or the magnaflex system.
Unit can also have transfers, pushers and lifts built into them if required. Special photocell brackets that clip onto and adjust with the guide rail are available on request.