POWERED ROLLER CONVEYOR
Our powered roller conveyor is primarily used to convey and accumulate containers and boxes.
There are two basic types which are roller to roller and tangential drive.
Both types use 50mm diameter x 1.5mm wall tube with either a single or double 14t 1/2” pitch steel sprocket (dependant on type) and precision roller bearings.
Side frames are manufactured from 2.5mm folded steel in either mild or stainless steel.
Standard roller pitch is 76.2mm on roller to roller and 75mm on tangential drive but other pitches are available if required.
Standard widths of the conveyors are in 50mm increments from nominally 200mm to 1000mm but again other widths are available to suit the application.
Multiple modules can be linked together on a single drive and accumulation can be achieved by using clutched rollers with either a blade stop or brake belt conveyor.
Bend modules are also available to compliment the standard range of modules.
Standard motors are SEW Eurodrive but other motor manufactures can be used on request.
Support stands are manufactured from box section with articulated adjustable feet for levelling.
Other options include sprung sensor rollers, low side frames for off loading, end stops and blade stops.