Unit 2, Tapton Business Park

Occupation Lane, Woodville.

Derbyshire. DE11 8GB

Tel No—01283 212277

             07813 602525




Our mattop conveyors are built to order and come in a standard range of widths in 50mm increments from a nominal 100mm to 1000mm although widths of up to 2500mm are achievable.

There are options for end drives and centre drives dependant on the layout. Drive is provided by either geared motors or special drive drums with integrated sprockets.

We have modules for elevators/lowerators that give a horizontal portion at the top and bottom of the conveyor for a better interface with other conveyors as well as rubber inserts for extra grip.

Construction can be of either mild or stainless steel and frames are 2.5mm thick. All the chains have full FDA approval so these conveyors are ideal for handling raw or unwrapped product.

Conveyors can be supplied with integrated bends which allow for smooth transportation during the change in direction.

The mattop chain itself can be of various pitches to suit each application, from ½” pitch for small product and very small transfers to 2” pitch for heavier applications.

As these conveyors have a chain width equal to the frame width so they are ideal for handling small loose items that would sit in the dead area of a belt conveyor.

Support stands are manufactured from box section and incorporate angular adjustment where necessary and there are adjustable feet for levelling.

Mattop belts can also be supplied with flights, corrugated side walls, rubber inserts and either a perforated or solid top plate to suit specific applications.